Click on the image to check the artwork
By certification 
IEC60335-2-9 Figure 104 Test Pots for testing induction hotplates (IEC60335-2-6 Fig. 102)
1: The pots are made of low carbon steel having a maximum carbon content of 0.08%.
2: The pots are met the requirements of IEC 60335-2-9 Fig. 103, IEC60335-2-6 Fig..102, GB4706.14 Fig104, GB4706.22 Fig. 102, etc. standards for testing induction hotplates.
3: Parameters:
Specification
Diameter d
mm e
mm a
mm c
mm
≤110 110 140 2±0.5 <0.006 d
〉110≤145 145 140 2±0.5 <0.006 d
〉145≤180 180 140 2±0.5 <0.006 d
〉180≤220 220 120 2±0.5 <0.006 d
〉220≤300 300 100 2±0.5 <0.006 d
1: The pots are made of low carbon steel having a maximum carbon content of 0.08%.
2: The pots are met the requirements of IEC 60335-2-9 Fig. 103, IEC60335-2-6 Fig..102, GB4706.14 Fig104, GB4706.22 Fig. 102, etc. standards for testing induction hotplates.
3: Parameters:
Specification
Diameter d
mm e
mm a
mm c
mm
≤110 110 140 2±0.5 <0.006 d
〉110≤145 145 140 2±0.5 <0.006 d
〉145≤180 180 140 2±0.5 <0.006 d
〉180≤220 220 120 2±0.5 <0.006 d
〉220≤300 300 100 2±0.5 <0.006 d
